Skip to content
Established 1991
Features
- Triple Heat Setting, Low (10 hours), Med (8 Hours), High (6 Hours). Easy to Read Power Indicator Lights Plug in Wall Adapter 7.4V 10,000mAh Lithium-Ion battery USB for Charging your Devices like (iPad, Smart Phone, Laptops Etc…)
- Description: One Single 7.4V/10,000mAh Rechargeable Battery with Wall Charger
- Compatible with Milwaukee Leather and Nexgen Heated Apparel
- 1. Do Not Wash or Put any Garment in the Dryer with the Battery Still inside
- 2. In extreme cold conditions always charge Battery to 100%, be aware that the battery will lose power after a few hours of usage. It is strongly recommended to purchase an extra battery pack for extreme cold conditions
- 3. Please note if the Battery Needs to be reset, plug into wall charger in the off position and then turn on the power button. This will restart the battery
- 1. 7.4v Battery Pack Will ONLY be work with Milwaukee Leather and Nexgen Heated 7.4V Apparel – Batteries will not work if used w/ other 12V heated product
- 2. Plug in charged battery to connection cable on Garment. To turn on battery, press and hold on/off for 2-3 seconds until light comes on
- 3. When on power starts at 100%, keep on high setting for five to ten minutes to warm up the Hoodie. Turn off the battery during extended breaks or indoors to extend your usage time Suggested Use: 1. 7.4v Battery Pack Will ONLY be used on Milwaukee Leather Heated 7.4V Apparel – Batteries will not work if used w/ other 12V heated product. 2. Plug in charged battery to connection cable on Garment. To turn on battery, press and hold on/off for 2-3 seconds until light comes on. 3. When on power starts at 100%, keep on high setting for five to ten minutes to warm up the Hoodie. Turn off the battery during extended breaks or indoors to extend your usage time.